Kontron KISS 2U KTQ87 User Manual download pdf (Page 19)

7. Product Description KISS 2U V2 MB_SBC– User's Guide (Version 1.00)

7.1.2. LED Indicators

The LED indicators (refer to

Fig. 9, pos. 5 and Fig. 11) of the KISS 2U V2 are located at the front of the device, behind the

front access panel.

2 HDD LED (orange)

1 Power LED (green)

1 2

Fig. 11: LED indicators

Power LED

(green)

This LED (

Fig. 11. pos. 1) is green when the system is switched on using the Power On/Off button.

Requirement:

The system must be connected to the power source (AC), using the corresponding power cable. The

power supply ON/OFF switch (if available), on the rear of the system must be set to “ON“.

HDD LED

(orange)

This LED (

Fig. 11. pos. 2) is orange when the hard disk is accessed.

Do not press the eject button, while the drive LED is lit or flashing.

7.1.3. Ports on the Front Side

7.1.3.1. USB Ports

KISS 2U V2 is equipped with two USB (2.0) ports on the front (

Fig. 9, pos. 10 and Fig. 12). You can connect various USB

devices to these two USB 2.0 interface connectors.

Fig. 12: USB ports on the front side

7.1.4. Front Access Panel

The securing lock mechanism (

Fig. 7, pos. 4) located at the access panel allows you, if required, to protect your system

from unauthorized use. When the access panel is locked, the cover of the KISS 2U V2 system can not be removed, and the

drives, filter mat holder and power button are not accessible.

If USB devices are connected to the USB ports on the front of the device, the front access panel can not

be closed and locked.

The key should be kept somewhere where it is not accessible to unauthorized persons.

www.kontron.com 17

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 48 49

No comments

Kontron KISS 2U KTQ87 User Manual Page 19