KTD-N0886-A Page 103 BIOS - Security
Security 10.3
Note “Secure Boot Configuration” and “TPM Configuration” see next pages.
Note 1: Only selectable if “Supervisor Password” is set.
Phoenix SecureCore Technology Setup
Secure Boot Activation
► Secure Boot Configuration
Supervisor Password is:
User Password is:
Set Supervisor Password
Supervisor Hint String
Set User Password
User Hint String
Min. password length
Authenticate User on Boot
HDD Password Select
HDD Security Status
HDD01 Password State
Set HDD01 User Password
Trusted Platform Module (TPM)
TPM Support
► TPM Configuration
[Disabled]
Set
Cleared
[Enter]
[ ]
[Enter]
[ ]
[ 1]
[Disabled]
[User Only]
Cleared
[Enter]
[Enabled]
Enable this option and the secure
boot feature is activated. When
the menu item is enabled, it
cannot be set to disabled.
Secure Boot Activation
(Note1)
Disabled
Enabled
Enable this option and the secure boot feature is
activated. When the menu item is enabled, it
cannot be set to disabled.
Set or clear the Supervisor account’s password.
Press Enter to type Supervisor Hint String.
Set User Password (Note1)
Set or clear the User account’s password.
Press Enter to type User Hint String.
Min. password length 1, 2, …, 20
Set the minimum number of characters for
password (1-20).
Authenticate User on Boot
(Note1)
Enable/Disable User Authenticate Prompt on
Boot.
HDD Password Select
Supports user only or both user and master
password.
TPM Support
This is used to decide whether TPM support
should be enabled or disabled.
Comments to this Manuals