Kontron KTQ77-FLEX User Manual download pdf (Page 118)

KTQ77/Flex Users Guide

KTD-N0848-C Page 118

Function Selection Description

Primary IGFX Boot Display

VBIOS Default

CRT (DVI-A, default 1)

EFP (DVI-D, default 1)

LFP (LVDS display)

EFP3 (DP2 display)

EFP2 (DP1, default 2)

LFP2

Select the Video Device which will be

activated during POST.

This has no effect if external graphics

present.

Secondary boot display selection will

appear based on your selection.

VGA modes will be supported only on

primary display.

LCD Panel Type

VBIOS Default

640x480 LVDS

800x600 LVDS

1024x768 LVDS1

1280x1024 LVDS

1400x1050(RB) LVDS1

1400x1050 LVDS2

1600x1200 LVDS

1366x768 LVDS

1680x1050 LVDS

1920x1200 LVDS

1440x900 LVDS

1600x900 LVDS

1024x768 LVDS2

1280x800 LVDS

1920x1080 LVDS

2048x1536 LVDS

Select LCD panel used by Internal

Graphics Device by selecting the

appropriate setup item.

SDVO-LFP Panel Type

VBIOS Default

1024x768 SDVO-LFP

1280x1024 SDVO-LFP

1400x1050 SDVO-LFP

1600x1200 SDVO-LFP

Select SDVO panel used by Internal

Graphics Device by selecting the

appropriate setup item.

Panel Scaling

Auto

Off

Force Scaling

Select the LCD panel scaling option used

by Internal Graphics Device.

Backlight Control

PWM Inverted

PWM Normal

GMBus Inverted

GMBus Normal

Backlight Control Setting

BIA

Auto

Disabled

Level 1

Level 2

Level 3

Level 4

Level 5

Auto: GMCH use VBT defaults.

Level n: Enabled with selected

Aggressiveness

Level.

Spread Spectrum clock

Chip

Off

Hardware

Software

Hardware: Spread is controlled by chip.

Software: Spread is controlled by BIOS.

BIOS - Chipset

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 140 141

Comments to this Manuals

No comments