Kontron AT8901M CLI User Manual Page 203
- Page / 313
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
AT8901M Utility Commands
Page 5 - 3 AT8901M CLI Reference Manual
5.1.3 download frudata
This command updates the IPMI FRU data. It downloades a FRU image from <url>
and updates the PM with the new FRU data. If the flash process is interrupted or fails,
FRU data may be corrupted and the download process has to be retried until it finishes
successfully.
Format
download frudata <url>
Mode Privileged EXEC
5.1.4 download fwum
This command updates the FWUM firmware. It downloads an FWUM firmware image
from URL and flashes the FWUM with the new image. If the flash process is
interrupted or fails, the FWUM will not recover gracefully and the board has to be
repaired manually.
Use this command with extreme care. It is not field safe.
Do not interrupt the upgrade process.
Format
download fwum <url>
Modes Privileged EXEC
5.1.5 download bootloader
This command loads a bootloader image into the second partition. It downloades a
bootloader image from <url>. This image is used for the next boot process. If the
download fails or the image is not correct (CRC error) the image in the first parttion is
used.
Format
download bootloader <url>
Mode Privileged EXECEXEC
5.1.6 download amcipmifw
This command updates the IPMI firmware on an AMC. It downloads an IPMI
firmware image from URL and flashes the MMC on the AMC with the new image. If
the flash process is interrupted or fails, the MMC will automatically recover and use
the previously installed image.
Format
download amcimpifw <url> {amcb1|amcb2}
Mode Privileged EXEC
5.1.7 startupslot
This command configures the startup slot with the supplied values from the other slots.
It will also check the configuration for consistency and flag any errors. The slot
number (<slotnumber>) ranges from 0 - 9.
Format
startupslot <slotnumber> config <F,1-99> initrd <A,B>
Mode Global Config
- AT8901M CLI Reference Manual 1
- AdvancedTCA 1
- AT8901M Preface 2
- Table of Contents 3
- Table of Contents AT8901M 10
- AT8901M Table of Contents 11
- Appendix 19
- Preface AT8901M 22
- 1.1 Command Syntax 28
- 1.2 Command Conventions 28
- 1.2.1 Common Parameter Values 29
- 1.5 Command Modes 31
- 1.5.2 CLI Error Messages 34
- 1.6 Using CLI Help 35
- 1.7 Accessing the CLI 36
- Switching Commands 37
- 2. Switching Commands 38
- Switching Commands AT8901M 100
- AT8901M Switching Commands 101
- Routing Commands 115
- Chapter 1 115
- 3. Routing Commands 116
- AT8901M Routing Commands 117
- Routing Commands AT8901M 118
- Quality of Service Commands 169
- 4.1.3 classofservice trust 171
- [<slot/port>] 174
- 4.2.1 diffserv 175
- 4.3 DiffServ Class Commands 176
- 4.3.2 class-map rename 177
- 4.3.3 match ethertype 177
- 4.3.4 match any 177
- 4.3.5 match class-map 177
- 4.3.5.1 no match class-map 178
- 4.3.6 match cos 178
- 4.3.7 match secondary-cos 178
- 4.3.9 match dstip 179
- 4.3.10 match dstl4port 179
- 4.3.11 match ip dscp 179
- 4.3.12 match ip precedence 179
- 4.3.13 match ip tos 180
- 4.3.14 match protocol 180
- 4.3.16 match srcip 181
- 4.3.17 match srcl4port 181
- 4.3.18 match vlan 181
- 4.4 DiffServ Policy Commands 182
- 4.4.2 drop 183
- 4.4.3 mirror 183
- 4.4.4 redirect 183
- 4.4.5 conform-color 183
- 4.4.6 class 183
- 4.4.6.1 no class 184
- 4.4.7 mark cos 184
- 4.4.8 mark ip-dscp 184
- 4.4.9 mark ip-precedence 184
- 4.4.10 police-simple 185
- 4.4.11 policy-map 185
- 4.4.11.1 no policy-map 185
- 4.5 DiffServ Service Commands 186
- 4.6 DiffServ Show Commands 187
- 4.6.2 show diffserv 188
- 4.6.3 show policy-map 188
- 4.6.4 show diffserv service 190
- 4.6.7 show service-policy 191
- 4.7.3 {deny 192
- 4.7.4 mac access-group 194
- 4.7.4.1 no mac access-group 194
- 4.7.5 show mac access-lists 194
- 4.8.1 access-list 195
- 4.8.1.1 no access-list 196
- 4.8.2 ip access-group 197
- 4.8.2.1 no ip access-group 197
- 4.8.3 acl-trapflags 197
- 4.8.3.1 no acl-trapflags 197
- 4.8.4 show ip access-lists 197
- 4.8.5 show access-lists 198
- 4.9 ACL trap commands 199
- Utility Commands 201
- 5. Utility Commands 202
- AT8901M Utility Commands 203
- Utility Commands AT8901M 204
- Management Commands 253
- 6. Management Commands 254
- AT8901M Management Commands 255
- Management Commands AT8901M 256
- Getting Help 287
- A. Getting Help 288
- AT8901M Getting Help 289
- Getting Help AT8901M 290
- (if not under warranty) 291
- List of Commands 293
- B. List of Commands 294
- AT8901M List of Commands 295
- List of Commands AT8901M 296
Related products and manuals for Hardware Kontron AT8901M CLI
Hardware Kontron AT8902 User Manual
(94 pages)
(94 pages)
Hardware Kontron AT8902M User Manual
(92 pages)
(92 pages)
Hardware Kontron AT8902M CLI User Manual
(315 pages)
(315 pages)
Hardware Kontron AT8904 User Manual
(93 pages)
(93 pages)
Hardware Kontron AT8904 CLI User Manual
(317 pages)
(317 pages)
Hardware Kontron AT8940 User Manual
(84 pages)
(84 pages)
Hardware Kontron RTM8940 User Manual
(36 pages)
(36 pages)
Hardware Kontron AT8402 CLI User Manual
(253 pages)
(253 pages)
Hardware Kontron AT8404 User Manual
(132 pages)
(132 pages)
Hardware Kontron AT8404 CLI User Manual
(373 pages)
(373 pages)
Hardware Kontron RTM8050 User Manual
(37 pages)
(37 pages)
Hardware Kontron AT8050 User Manual
(165 pages)
(165 pages)
Hardware Kontron RTM8242 User Manual
(34 pages)
(34 pages)
Hardware Kontron AT8242 User Manual
(109 pages)
(109 pages)
Hardware Kontron AT8060 User Manual
(160 pages)
(160 pages)
Hardware Kontron RTM806x User Manual
(40 pages)
(40 pages)
© 2020, manymanuals.com. All rights reserved. | 1.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals