ETX®-CD / Specification
3.4 Electrical Specification
3.4.1 Supply Voltage
Following supply voltage is specified at the ETX® connector:
Supply Voltage:
5V +/- 5%
5V_Stb:
5V DC +/- 5%
3.4.2 Power Supply Rise Time
» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.
» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point
following the ATX specification
3.4.3 Supply Voltage Ripple
» Maximum 100 mV peak to peak 0 – 20 MHz
3.4.4 Power Consumption
The maximum Power Consumption of the different ETX®-CD modules is 19 - 40W (100% CPU load; 90°C CPU temperature).
Further details with measurements and TDP values of the single variants can be found in our customer section.
Information there is available after registration.
14
Comments to this Manuals