KTD-N0819-K Page 12
Monitor
Subsystem
• Smart Fan control system, support Thermal® and Speed® cruise for two on-board
Fan connectors: CPU Fan (on-board) and System Fan (on-board)
• Smart Fan control system, support Speed® cruise for two off-board Fans
(Fan3/Fan4) via Feature Connector.
• Three thermal inputs: CPU Die temperature (precision +/- 3ºC), System
temperature (precision +/- 3ºC) and System Temperature External via Feature
Connector (precision +/- 1ºC).
• Voltage monitoring
• Intrusion (Case Open) detect input, (via Feature connector)
• Sleep S5# Indication, (via Feature connector)
• System Powergood Signal, (via Feature connector)
Supply Unit
ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.
Alternatively (mITX version only): +12V single supply via ATX+12V (4-pole) connector,
but with limitation to power load (especially +5V for USB).
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is 4.1µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
• Kontron Technology / AMI BIOS (EFI core version)
• Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
o Suspend (S1 mode)
o Suspend To Ram (S3 mode)
o Suspend To Disk (S4 mode)
• “Always On” BIOS power setting
• RAID Support (RAID modes 0,1, 5 and 10)
Systems
Support
• Vista (32b * + 64b *)
• Windows 7 (32b + 64b *)
• Linux
• VxWorks
• Windows Server 2003 r2 (32b * + 64b *)
• Windows Server 2008 r2 (32b * + 64b *)
• WES7 (32b + 64b)
*= Out Of The Box installation test only.
Comments to this Manuals