KTD-N0819-K Page 41
5.3.2 USB Connector 2/3 (USB2/3)
USB Ports 2 and 3 are mounted together with DP1 port.
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
5.3.3 USB Connector 4/5 (USB4/5)
USB Ports 4 and 5 are mounted together with ETH1 port.
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
USB2+ USB2-
USB3+ USB3-
Differential pair works as Data/Address/Command Bus.
5V/SB5V
5V supply for external devices. SB5V is supplied during powerdown to allow
wakeup on USB device activity. Protected by resettable 1A fuse covering both USB
ports.
USB4+ USB4-
USB5+ USB5-
Differential pair works as Data/Address/Command Bus.
5V/SB5V
5V supply for external devices. SB5V is supplied during powerdown to allow wakeup
on USB device activity. Protected by resettable 1A fuse covering both USB ports.
Comments to this Manuals