Kontron CP6004-SA User Manual download pdf (Page 22)

Introduction CP6004-SA

Page 1 - 4 ID 1052-8529, Rev. 2.0

D R A F T — F O R I N T E R N A L U S E O N L Y

1.2 Board-Specific Information

The CP6004-SA is a CompactPCI single-board computer based on the 3

generation Intel®

Core™ i7 and i5 processors and specifically designed for use in highly integrated platforms with

solid mechanical interfacing for a wide range of industrial environment applications.

Some of the CP6004-SA's outstanding features are:

• Support for the following 3

generation processors:

•

Intel® Core™ i7-3615QE (SV) quad-core processor, 2.3 GHz, 6 MB L3 cache

•

Intel® Core™ i7-3612QE (SV) quad-core processor, 2.1 GHz, 6 MB L3 cache

• Intel® Core™ i7-3555LE (LV)

dual-core processor

, 2.5 GHz, 4 MB L3 cache

•

Intel® Core™ i5-3610ME (SV) dual-core processor, 2.7 GHz, 3 MB L3 cache

• Intel® QM77 Express Chipset

• Up to 16 GB, dual-channel, DDR3 SDRAM memory with ECC running at 1600 MHz on two

SODIMM sockets

• Integrated 3D high-performance graphics controller with three high-resolution graphics in-

terfaces (VGA, 2 x HDMI/DVI)

• 64-bit/66 MHz PCI or PCI-X CompactPCI interface (PICMG 2.0)

• One PMC slot with PCI functionality and with rear I/O support; 64-bit/66 MHz PCI inter-

face or 64-bit/133 MHz PCI-X interface

• One XMC slot utilizing a x8 lane PCI Express 2.0 interconnection

• Five Gigabit Ethernet interfaces:

• Three Gigabit Ethernet interfaces on front I/O

• Two Gigabit Ethernet interfaces on rear I/O (PICMG 2.16)

• Two Gigabit Ethernet (GbE) controllers:

• One Intel® 82579LM Gigabit Ethernet controller connected to one GbE port on the

front panel

• One Intel® I350 quad-port Gigabit Ethernet controller connected to two GbE ports on

the front panel and two GbE ports on the rear I/O

• Six SATA interfaces with SATA RAID 0/1/5/10 support:

• One onboard SATA 6 Gb/s interface for the standard SATA onboard connector

• One onboard SATA 6 Gb/s interface for either one SATA Flash module or one SATA

2.5" HDD/SSD

• Four SATA 3 Gb/s interfaces on the rear I/O

• Six USB ports:

• Two USB 2.0 ports on the front panel

• Four USB 2.0 ports on the rear I/O

• Two COM ports:

• One RS-232 COM port either on the front panel or on the rear I/O (COMA)

• One RS-232 COM port on the rear I/O (COMB)

• TCG 1.2 compliant Trusted Platform Module (TPM), on request

• Two SPI boot flashes for two separate uEFI BIOS images:

• One standard SPI boot flash

• One recovery SPI boot flash

• Watchdog timer

• Battery-backed real-time clock (RTC)

• Three onboard DIP switches for board configuration

• Supports PICMG Packet Switching Backplane Specification 2.16

• IPMI support

• 4HP, 6U CompactPCI

• Passive heat sink solution for forced-airflow cooling

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comments to this Manuals

No comments

Kontron CP6004-SA User Manual Page 22

Comments to this Manuals

Related products and manuals for Hardware Kontron CP6004-SA