Kontron CP6004-SA User Manual download pdf (Page 32)

Introduction CP6004-SA

Page 1 - 14 ID 1052-8529, Rev. 2.0

D R A F T — F O R I N T E R N A L U S E O N L Y

IPMI

IPMI Controller • NXP® ARM7 microcontroller with redundant 512 kB firmware flash and

automatic roll-back strategy

• The IPMI controller carries out IPMI commands such as monitoring sev-

eral onboard temperature conditions, board voltages and the power

supply status, and managing hot swap operations.

• The IPMI controller is accessible via two IPMBs (through the J1 and J2

connectors) and one host Keyboard Controller Style (KCS) Interface.

Thermal

Thermal Management CPU and board overtemperature protection is provided by:

• Temperature sensors integrated in the 3

generation Intel® Core™ i7/i5

processor:

• One temperature sensor for monitoring each processor core

• One temperature sensor for monitoring the graphics core

• One temperature sensor for monitoring the package die temperature

• One temperature sensor integrated in the Intel® QM77 Chipset for mon-

itoring the chipset

• One onboard temperature sensor for monitoring the board temperature

• Specially designed heat sink

Security

TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-

based data and system security (on request)

Software

uEFI BIOS AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specifi-

cation and the Intel Platform Innovation Framework for EFI.

• LAN boot capability for diskless systems (standard PXE)

• Redundant image; automatic fail-safe recovery in case of a damaged

image

• Non-volatile storage of setting in the SPI boot flash (battery only re-

quired for the RTC)

• Compatibility Support Module (CSM) providing legacy BIOS compatibil-

ity based on AMIBIOS8

• Command shell for diagnostics and configuration

• uEFI shell commands executable from mass storage device in a Pre-OS

environment (open interface)

• IPMI support in the command shell

Software IPMI IPMI firmware providing the following features:

• The IPMI controller is accessible via up to two IPMBs, IOL and one KCS

interface with interrupt support

• The IPMI firmware can be updated in the field through all supported

onboard interfaces using the update functions of the open-source tool

“ipmitool”. For further information on the ipmitool refer to the

sourceforge.net web site.

• Two IPMI controller flash banks with automatic roll-back capability in

case of an upgrade firmware failure

• Board supervision and control extensions such as board reset, power

and SPI boot flash control, etc.

Operating Systems

The board is offered with various Board Support Packages including Windows,

VxWorks and Linux operating systems. For further information concerning the

operating systems available for the CP6004-SA, please contact Kontron.

Table 1-1: CP6004-SA Main Specifications (Continued)

FEATURES SPECIFICATIONS

1 2 ... 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Kontron CP6004-SA User Manual Page 32

Comments to this Manuals

Related products and manuals for Hardware Kontron CP6004-SA