Kontron CP6004-SA User Manual Page 29
- Page / 36
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CP6004-SA Introduction
ID 1052-8529, Rev. 2.0 Page 1 - 11
D R A F T — F O R I N T E R N A L U S E O N L Y
Chipset
Intel® QM77 Mobile Intel® QM77 Express Chipset:
• Two x4 or eight x1 PCI Express 2.0 ports operating at 5 GT/s (only one
x4 PCI Express port is used on the CP6004-SA)
• SATA host controller with six ports and RAID 0/1/5/10 support
• Two SATA 6 Gb/s ports accessible via onboard connectors
• Four SATA 3 Gb/s ports accessible via rear I/O
• USB 2.0 host interface with up to 14 USB ports available (only six ports
are used on the CP6004-SA)
• USB 3.0 host interface with up to 4 USB ports available (not used on the
CP6004-SA)
• Integrated Ethernet controller
• SPI flash interface support
• Low Pin Count (LPC) interface
• Power management logic support
• Enhanced DMA controller, interrupt controller, and timer functions
• System Management Bus (SMBus) compatible with most I²C™ devices
• DMI 2.0 with 5 GT/s and FDI interfaces to the processor
• High Definition Audio (HDA) interface
• Analog display port
• Three digital display ports
• Integrated RTC
Integrated
Controller
Graphics controller High-performance 3D graphics controller integrated in the processor:
• Supports analog displays (CRT) up to a resolution of 2048 x 1536
pixels with 32-bit color @ 75 Hz
• Supports digital displays (HDMI/DVI) up to a resolution of 1920 x
1200 pixels @ 60 Hz
• Dynamic Video Memory Technology (DVMT)
Interfaces
CompactPCI
Compliant with CompactPCI Specification PICMG
2.0 R 3.0:
• System controller operation
• 64-bit/66 MHz PCI or PCI-X master interface with dedicated PCIe-to-
PCI-X bridge
• 3.3V or 5V signaling levels (universal signaling support)
Compliant with the Packet Switching Specification PICMG 2.16.
The CP6004-SA supports System Master hot swap functionality and applica-
tion-dependent hot swap functionality when used in a peripheral slot.
When used as a System Master, the CP6004-SA supports individual clocks for
each slot and the ENUM signal handling is in compliance with the PICMG 2.1
Hot Swap Specification.
When installed in a peripheral slot, the CP6004-SA is isolated from the Com-
pactPCI bus. It receives power from the backplane and supports rear I/O and,
if the system supports it, packet switching (in this case up to two channels of
Gigabit Ethernet).
Table 1-1: CP6004-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS
- » User Guide « 1
- Revision History 2
- Disclaimer 2
- Table of Contents 3
- List of Tables 9
- Preface CP6004-SA 10
- List of Figures 11
- CP6004-SA Preface 13
- General Instructions on Usage 16
- Two Year Warranty 17
- Introduction 19
- Introduction CP6004-SA 20
- 1. Introduction 21
- CP6004-SA Introduction 23
- Temperature Sensor 27
Related products and manuals for Hardware Kontron CP6004-SA
Hardware Kontron CP6004X-SA User Manual
(36 pages)
(36 pages)
Hardware Kontron CP6004-RC User Manual
(42 pages)
(42 pages)
Hardware Kontron CP6005X-SA User Manual
(24 pages)
(24 pages)
Hardware Kontron IPMI Firmware User Manual
(22 pages)
(22 pages)
Hardware Kontron VM162 User Manual
(120 pages)
(120 pages)
(9 pages)
Hardware Kontron AT8901 User Manual
(79 pages)
(79 pages)
Hardware Kontron AT8901M User Manual
(76 pages)
(76 pages)
Hardware Kontron AT8901M CLI User Manual
(313 pages)
(313 pages)
Hardware Kontron AT8902 User Manual
(94 pages)
(94 pages)
Hardware Kontron AT8902M User Manual
(92 pages)
(92 pages)
Hardware Kontron AT8902M CLI User Manual
(315 pages)
(315 pages)
Hardware Kontron AT8904 User Manual
(93 pages)
(93 pages)
Hardware Kontron AT8904 CLI User Manual
(317 pages)
(317 pages)
Hardware Kontron AT8940 User Manual
(84 pages)
(84 pages)
Hardware Kontron RTM8940 User Manual
(36 pages)
(36 pages)
Midland G7 XT manuály
Uživatelské manuály a uživatelské příručky pro Komunikace Midland G7 XT.
Poskytujeme 1 manuály pdf Midland G7 XT ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comments to this Manuals